J＆H Corporation ® TPE materials have the following advantages when applied to household products: ● The appearance is delicate and dry, and the touch is like silicone; The hardness range is wide (20-100A), the softest can reach 20A, and still remains non-sticky. ● It can be molded at low temperature, with short cooling time, saving energy consumption and shortening cycle. ● Superior processing performance, high and low fluidity to meet the requirements of various complex structure products. ● It has excellent adhesion with PP, ABS, PC, PA, PCTG, PMMA, PS and other hard adhesives. ● It is safe and odorless. In addition to passing ROHS REACH PAHS, the materials can also pass various tests of FDA, LFGB, GB4806 and other food grade and special oil solution tests.

J＆H Corporation ® TPE materials have the following advantages when applied to baby products: ● Excellent processing performance and wide hardness range. ● The product surface is delicate and does not irritate the baby's skin. ● Soft and dry to the touch, not easy to stick ash. ● Safe and odorless, meeting the needs of infants and young children. ● It can pass various tests of FDA, LFGB, GB4806 and other food grade and special oil solution tests, without BPA.

J＆H Corporation ® TPE materials have the following advantages when applied to sports equipment: ● High abrasion resistance, scratch resistance, good strength and toughness. ● It has super elasticity and strong resilience, and can be used for elastic products, as well as silent and protective products. ● Delicate and dry touch, safe and antiskid, easy to grasp. ● The hardness range is wide, and the softest one can reach 15-20A, still remains non-stick. ● Good odor control, superior rubber coating performance and good transparency. Resistance to sweat, sea water and other reagents.

J＆H Corporation ® TPE materials have the following advantages when applied to electronic appliances: ● Good electrical insulation performance and flame retardancy. ● Delicate and smooth touch, no irritation to skin. ● Oil resistant, scratch resistant, easy to stain. ● It has excellent adhesion with PP, ABS, PC, PA, PCTG, PETG, PMMA, PS and other hard adhesives. ● UL certified (File No. E464678).

J＆H Corporation ® TPE/TPV materials have been widely used in automobile transportation, with a sharp increase in output: ● Suitable for injection molding, blow molding, extrusion and other processes; The material has high strength, and the surface is smooth and not sticky; The material is light, reducing weight and cost. ● Low emission value, meeting the requirements of OEM in terms of smell; Excellent weather resistance and UV resistance to yellowing; Oil and corrosion resistance, suitable for use on automobiles. ● Excellent adhesion with PP, ABS, PC, PA, PMMA and other hard adhesives; Beautiful appearance and strong plastic feeling. ● It can withstand low temperature - 50 ℃ and high temperature 130 ℃; It can pass the permanent deformation test. ● Passed the IATF16949:2016 quality management system certification.

J＆H Corporation ® The application of TPE materials in industrial buildings has the following advantages: ● Good temperature and weather resistance, suitable for long-term outdoor use. ● Chemical corrosion resistance, strong anti-oxidation radiation ability. ● The surface of extruded products is smooth and smooth with good hand feel; The surface of injection molded products is fine and dry. ● The product has high strength and good toughness; It has excellent adhesion with PP, ABS, PC, PA and other hard adhesives. ● Excellent wear resistance, which can be used for the protection of rotating products: it can be co-extruded with hard rubber in two layers, and can also be cast and blow molded.

J＆H Corporation ® TPE materials are widely used in the medical field and have the following advantages: ● Good transparency, non allergy, good biocompatibility and non-toxic. ● Excellent skin friendly performance, no irritation to skin. ● It does not contain halogen atoms and plasticizers, and meets the environmental requirements of the European Union and the United States. ● Good chemical resistance and solvent resistance. ● It can pass the disinfection test of alcohol and ethylene oxide.

J＆H Corporation ® TPE materials have the following advantages when applied to foaming products: ● The density is very low, and it still maintains a certain strength. ● The minimum injection density can reach 0.45g/cm³ without changing the original injection equipment and mold. ● The surface is matte, dry and non-stick. ● Wide hardness range, 20A-95A. ● Extrusion, calendering and injection foaming. ● It has great advantages in reducing weight and cost.